Service telephoneSlaughterhouse machinery in the operation should also do daily maintenance. The grease in the bearing should be replaced every half a year, and calcium grease should be selected. All the protection and maintenance work must be carried out under the condition of power off. At the end of each work, the machine in the slaughterhouse should be washed clean with water. The roughing machine can not be cleaned directly with water spray pipe. The machine parts should be cleaned regularly and the running parts should be maintained, so that the machine parts will not be damaged prematurely. In the process of operation, if the sound of the machine is abnormal, it is necessary to stop the machine immediately to check, and continue to solve the problem after the problem is cleared.
How to maintain the slaughtering line?
1. Maintenance method of head motor:
Slaughtering line must not be water into the motor, as this may cause damage to the motor, affect the use. It will also shorten the service life of slaughtering equipment.
2. Maintenance method of chain:
After a long time of operation, the chain of slaughtering line may cause the original lubricating oil to heat up and evaporate. Such a simple operation may cause the chain of slaughtering line to be unbalanced in the process of operation, increase the noise, crawl and so on. Add grease or strong lubricating oil to the chain.
3. Repair and maintenance methods of the head reducer of slaughtering line:
Drain the engine oil in the gearbox, clean the inside of the gearbox with diesel or engine oil, and then add new lubricating oil to the middle of the observation window. In the future, you can change the lubricating oil of the slaughtering line once a year. Too much lubricating oil may cause the gearbox to heat up, and the motor overload may cause the motor protection switch to jump off. Too little lubricating oil may cause gearbox heating, noise increase and gearbox hanging and invalid.